Restoring Old Toys

When DD was first born, we bought SO MANY toys for her, all new. I shudder to think of how much we spent on toys that probably only lasted a year or two at most. (To my credit, most were either sold or donated to charity then, not thrown out.) My sister has a far more sensible attitude, and gets a lot more for her $50 at the second hand stores or garage sales than we ever got at the toystore!

These days, we buy a few select, high quality toys new, and mostly either make them at home, or buy second hand. While there are many second hand toys that are like new, or even gain appeal through being loved, many just aren't as 'pretty' as those you can buy new. And I don't believe in kids getting 'second best'. Though DD will happily play with her second hand toys, I often like to spruce them up a bit for her.

Here is the toy ironing board we bought for a couple of dollars somewhere. A new cover, and a second hand wooden iron from the markets, and it's a toy worth of any child's playroom. (Clicking on the pictures will enlarge them so you can have a good look if you want.)

This pram, likewise, was a dollar or two at a second hand store. I believe they're $7 or so new at bargain stores, which is probably where this one was originally from. With a new cover, it looks far prettier than the original one would have looked the day it came home from the store. I took off the old cover and used it to make a pattern for this new one. DD and I gave the pram a good scrubbing. The new cover took less than an hour to sew up (mostly due to me trying to 'improve' over the original design, when will I learn), and used the buckle from the original cover, but otherwise all new material (less than half a metre of $5 a metre material).

I enjoy this so much more than just going out and buying new, which always leaves me with a sour taste in my mouth.

These toys will also be a great addition to DD's 'home corner' once I get to it.

Keeping on Mending

Some of my regular readers (and I do have regular readers, including 5 followers, Yay!) might remember this sheet from a previous repair post. I've been washing a lot of things on hot to be sure to keep the chicken's mites out of the house, and unfortunately the hot water (my machine does a 90 degree hot wash) has killed the elastic in the fitted sheet. Last time it was on the bed, it just kept coming off at the corners, very annoying.

I thought at first that the elastic had just snapped somewhere, but when I unpicked the seam at one corner, it was obvious it was just destroyed. So I cut the elastic, and pulled the whole lot out. (I could have left it in, but I'm a bit of a perfectionist.)

The fastest way to unpick the seams is to use this handy little tool. It's called a quick unpick, and is invaluable to the sewing enthusiast. No matter how good you get at sewing, there will always be times when you just have to unpick something. Like when you sew the arm of a t-shirt onto the neck opening. (Not that I would do something like that...) And also handy in this case, where you want to undo the stitching to change the elastic. (Handy hint, you can do this for skirts and pants that have become to tight but otherwise still fit, so long as the elastic isn't sewn in.)

Once I'd unpicked that spot, I cut the elastic, and pulled the whole lot out, a very slow and tedious process.

Then I had to replace it with some good elastic. I didn't happen to have a piece long enough, so I pulled out 3 2m bits, and sewed them together with a zig zag stitch like this.

I forgot to take photos of putting the new elastic in unfortunately, but basically you attach a safety pin to the end of the elastic, and use that to thread it through the casing. I found that all the way around a queen sized sheet was a LONG way, so I ended up unpicking the opposite corner too, and threading through from the opposite end as well.

Because of the long length, it's quite hard to get the elastic through evenly, so I simply pulled it as tight as I could, fastened it with the safety pin, and put the sheet on. Each time I'm making the bed, I check it, and often tighten it a little. When it's time to change the sheets again, I'll sew the ends of the elastic together, and close up the opening.

Some people might thing that this is a pointless waste of time, and it's much easier to just go out and buy a new set of sheets. But the reality is that the sheets are still good (and my favourite set), and they have plenty of wear left in them yet. The top sheet and pillow cases are still find, and the fitted sheet is still in reasonable condition. So for about 20 minutes work, I just saved about $100 (I refuse to buy cheap sheets, hate them), and at least half an hour's time had I needed to go buy a new set! Not to mention the damage to the environment to grow the cotton, process it into material, make the sheets, and ship them back and forth. It just makes sense to repair things where you can.

Mending a Tear

A few nights ago, I ripped a hole in the bottom sheet on our bed. You see, there was a minuscule particle of grit that had somehow gotten under the sheet (at least, I think it was under it), and I have a bit of a hatred of dust/grit in my bed, so I had to rip it out. Unfortunately, I had a bit of sheet between my fingers as well, and this was the result. So instead of letting the hole get bigger and bigger until I threw the sheet out, I pulled it straight off the bed (well, next morning, I didn't get up to do it in the middle of the night, rest assured), and mended it. The rest of the sheet is still in good condition, and being nice, expensive, 100% cotton sheets, I didn't want to have to buy new ones straight away.

It was easy to mend. If you're not craftily inclined, you can buy iron on patches that will do a fair job of this sort of mending, but I prefer to go for the cheaper option. I cut a square of cotton out of an old sheet that was too far gone to mend, and pinned it behind the tear. Then I sewed around the edges to hold it in place, then in close to the tear, then finally, zig-zagged over the actual tear itself. Luckily I still had green thread on my machine from making the Teddy Bear, so it even matched.

I actually feel really satisfied doing things like this. I mean, for taking the time to do a 10 minute job, I actually saved $100! This is actually much better even than if I'd made $100, as I don't have to pay tax on it! Not to mention not needing to take the time, energy and fuel to go buy a new set of sheets!

It's more than just the saving though, I feel productive, and I feel a connection to the things and people in my house when I do jobs like this. Now I have a couple of DH's cargo pants sitting on my machine, waiting for a similar treatment.